Order Products : sales@su-jiao.com
TECHLEN M1300
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | DAEHA Co., LTD |
| Trademark: | TECHLEN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gxgyzI_TECHLEN-M1300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECHLEN M1300 is a Polypropylene material. It is available in Asia Pacific. Typical application of TECHLEN M1300: Automotive |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.898 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 4.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 26.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 300 | % | ASTM D638 |
| Flexural Modulus | 1270 | MPa | ASTM D790 |
| Flexural Strength | 32.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | ASTM D256 | ||
| -10°C | 39 | J/m | |
| 23°C | 110 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trademark PE LLD2025G | Trademark Plastics Corporation | LLDPE | Trademark PE |
| Baydur® 661 IBS (45 pcf) | Covestro - PUR | PUR-MDI | Baydur® |
| HiFill® PBT GF40 | Techmer Engineered Solutions | PBT | HiFill® |
| HiFill® PA6/6 0135 BL069 | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LNP™ THERMOCOMP™ RF006 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
