Order Products : sales@su-jiao.com
Hanwha Total TPE SE75
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gwUkOt_Hanwha-Total-TPE-SE75.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SE75 Thermoplastic Elastomer is a dynamically fully cured thermoplastic elastomer. There is no vulcanization, and this is shipped pre-mixed an ready to process. This can be processed on extrusion,injection and blow molding equipment for faster molding cycle times and lower per-part costs. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 6.86 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 380 | % | ASTM D412 |
| Tear Strength | 29.4 | kN/m | ASTM D624 |
| Compression Set (25°C, 70 hr) | 34 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sasol Polymers PE LT079 | Sasol Polymers | LDPE | Sasol Polymers PE |
| Silmar® SIL94BA-1575 | Interplastic Corporation | Polyester, TS | Silmar® |
| Amilan® CM1011G-30 | Toray Resin Company | Nylon 6 | Amilan® |
| KOPHOS® KO1989 | Kolon Plastics, Inc. | PC | KOPHOS® |
| LNP™ STAT-KON™ OEL13I compound | SABIC Innovative Plastics | PPS, Linear | LNP™ STAT-KON™ |
