Order Products : sales@su-jiao.com
RECLAIR® M 24300
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RECLAIR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gwNtTd_RECLAIR-M-24300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Reclair M 24300, is a Butene comonomer based linear low density grade with narrow molecular weight distribution and optimum levels of antioxidants. It offers good fluidity and excellent processability and is mainly recommended fror preparing masterbatches. It can be also used for producing injection moulded lids, containers, houseware and general purpose articles as this grade exhibits good flexibility and low warpage. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (Injection Molded, F0) | 3.00 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 10.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 700 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 325 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 95.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart Plus HDPE 5502 | ResMart | HDPE | ResMart Plus |
| TAROLOY 50 | Taro Plast S.p.A. | PC+PBT | TAROLOY |
| NITRIFLEX N-386 B | NITRIFLEX | NBR | NITRIFLEX |
| ALPHALAC SG910 | LG Chem Ltd. | PS (HIPS) | ALPHALAC |
| LEXAN™ XHT2146 resin | SABIC Innovative Plastics | PC | LEXAN™ |
