Order Products : sales@su-jiao.com
UNITIKA Nylon 6 CX-2500
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | UNITIKA Plastics Division |
| Trademark: | UNITIKA Nylon 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gvFKZn_UNITIKA-Nylon-6-CX-2500.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UNITIKA Nylon 6 CX-2500 is a Polyamide 6 (Nylon 6) material. It is available in Asia Pacific or North America. Primary attribute of UNITIKA Nylon 6 CX-2500: Flame Rated. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.11 | 1.11 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow : 3.20 mm | 1.3 | 1.3 | % | |
| Flow : 3.20 mm | 0.70 | 0.70 | % | |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr | 0.70 | 0.70 | % | |
| Equilibrium, 23°C, 50% RH | 1.3 | 1.3 | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 3000 | 2700 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 90.0 | 67.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | |||
| Yield | 6.0 | 6.0 | % | |
| Break | 60 | 60 | % | |
| Flexural Modulus | 2900 | 2600 | MPa | ISO 178 |
| Flexural Stress | 126 | 113 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 2.0 | 2.0 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | 80 | 80 | kJ/m² | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 100 | 85.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 90.0 | 70.0 | °C | ISO 75-2/A |
| CLTE - Flow | 7.7E-5 | 7.7E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | -- | ohms·cm | IEC 60093 |
| Electric Strength (1.00 mm) | 33 | -- | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 3.30 | -- | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.060 | -- | IEC 60250 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (0.750 mm) | V-2 | V-2 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Qenos PP PPT 2052 | Qenos Pty Ltd | PP Copolymer | Qenos PP |
| WPP PP PPC3225 | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| HiFill® PEEK GF30 A NAT | Techmer Engineered Solutions | PEEK | HiFill® |
| Lapex A G/20 | LATI S.p.A. | PESU | Lapex |
| NORYL™ WCD835 resin | SABIC Innovative Plastics | PPE+TPE | NORYL™ |
