Order Products : sales@su-jiao.com
STERLENE™ HMU234
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | R&P (Pte.) Ltd. |
| Trademark: | STERLENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | guuqGc_STERLENE-HMU234.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| STERLENE™ HMU234 is a black mineral filled compounded polyolefin grade showing high stiffness, high heat resistance, low emission and low odor for underhood application. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 10 | g/10 min | ISO 1133 |
| Melt Volume-Flow Rate (MVR) (230°C/2.16 kg) | 12.0 | cm³/10min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - Secant (23°C) | 3200 | MPa | ISO 527-2/50 |
| Tensile Stress (Yield, 23°C) | 34.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, 23°C) | 4.0 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Complete Break) | 3.4 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 64.0 | °C | ISO 75-2/Af |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 190 to 240 | °C | |
| Mold Temperature | 25.0 to 60.0 | °C |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Delta N66R-1MOSPO HS | Delta Polymers | Nylon 66 | Delta |
| Fainplast PVC PHA 81 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Flontech® FT-1-FM-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Geon™ Vinyl Rigid Molding M4110 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
| MTEGRITY™ HDPE HMW EH120 | M. Holland Company | HDPE, EHMW | MTEGRITY™ HDPE HMW |
