AXELERON™ CX A-0012 NT CPD

Category:	LDPE , Nucleating Agent Masterbatch
Manufacturer:	The Dow Chemical Company
Trademark:	AXELERON™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	guI1sk_AXELERON-CX-A-0012-NT-CPD.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Dow AXELERON™CX A- 0012 NT is a masterbatch, which is used as a nucleating agent in gas injection processing. It is specially developed for easy mixing with DGDA-6944 NT or DGDB-6944 NT HDPE and DFDA-1253 NT LDPE. If used properly, the product will form a small, evenly distributed cell structure. The masterbatch is based on high-pressure LDPE resin and is added with a 10% heating chemical foaming agent. The use of this product should be 0.1% to 0.3% nucleating agent content, or 1-3% masterbatch content. Typical applications include CATV lead-in cables, models 59, 6, 7 and 11.

General Information
Uses	Coaxial Cable Insulation Wire and cable applications Masterbatch Foam
Forms	Particle
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.970	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) ¹(190°C/2.16 kg)	2.0	g/10 min	ASTM D1238

Extrusion instructions
AXELERON™ CX A-0012 NT CPD is designed to be extruded with Dow's gas injection compounds AXELERON™ CX 6944 NT CPD HDPE and AXELERON™ CX 1253 NT CPD LDPE. It is normally added at 1-3% masterbatch concentration into a blend of 60-80% 6944 and 20-40% 1253.While the exact temperature profile required will depend upon the screw design and construction being made, the following extrusion temperature profile represents a good starting point: Feed Zone: 285-300°F (140-150°C) Transition Zone: 340-355°F (170-180°C) Gas Injection Point: 340-375°F (170-190°C) Metering Zone: 285-340°F (140-170°C); depends on diameter insulation Crosshead and Die: 265-320°F (130-160°C); depends on diameter insulation

Extrusion instructions

AXELERON™ CX A-0012 NT CPD is designed to be extruded with Dow's gas injection compounds AXELERON™ CX 6944 NT CPD HDPE and AXELERON™ CX 1253 NT CPD LDPE. It is normally added at 1-3% masterbatch concentration into a blend of 60-80% 6944 and 20-40% 1253.While the exact temperature profile required will depend upon the screw design and construction being made, the following extrusion temperature profile represents a good starting point: Feed Zone: 285-300°F (140-150°C) Transition Zone: 340-355°F (170-180°C) Gas Injection Point: 340-375°F (170-190°C) Metering Zone: 285-340°F (140-170°C); depends on diameter insulation Crosshead and Die: 265-320°F (130-160°C); depends on diameter insulation

Note Message
1 .	Base Resin

Resin Grade	Manufacturer	Category	Trademark
RTP 381.3	RTP Company	PC	RTP
SCHULAMID® 66 MV 5 FR	A. Schulman Europe	Nylon 66	SCHULAMID®
Tecopet® PT70 GR30 NL100 MB	Eurotec Engineering Plastics	PET	Tecopet®
ADBON 9610	Pooya Polymer Tehran	Polyolefin, Unspecified	ADBON
LNP™ LUBRICOMP™ RP004S compound	SABIC Innovative Plastics	Nylon 66	LNP™ LUBRICOMP™