Order Products : sales@su-jiao.com
Novablend™ 9562
| Category: | PVC Alloy , Polyvinyl Chloride Alloy |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Novablend™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gsnoO2_Novablend-9562.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Custom Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.20 | g/cm³ | ASTM D792 |
| Spiral Flow | 58.4 | cm | |
| Molding Shrinkage - Flow | 0.20 to 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 79 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 2 | 2240 | MPa | ASTM D638 |
| Tensile Strength 3(Yield) | 46.2 | MPa | ASTM D638 |
| Tensile Elongation 4(Break) | 50 | % | ASTM D638 |
| Flexural Modulus | 2280 | MPa | ASTM D790 |
| Flexural Strength | 68.3 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| -18°C, 3.18 mm, Injection Molded | 130 | J/m | |
| 0°C, 3.18 mm, Injection Molded | 640 | J/m | |
| 23°C, 3.18 mm, Injection Molded | 960 | J/m | |
| Drop Impact Resistance (23°C, 3.18 mm) | 89.0 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm, Injection Molded | 77.3 | °C | |
| 0.45 MPa, Annealed, 3.18 mm 5 | 82.0 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm, Injection Molded | 64.4 | °C | |
| 1.8 MPa, Annealed, 3.18 mm 6 | 74.1 | °C | |
| CLTE - Flow | 1.4E-4 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Properties reported for Natural color. |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 51 mm/min |
| 4 . | Type I, 51 mm/min |
| 5 . | Injection Molded |
| 6 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Versaflex™ OM 1060X-9 | PolyOne Corporation | TPE | Versaflex™ |
| CENUSIL® R 150 | Wacker Chemie AG | Silicone | CENUSIL® |
| Dryflex® 402701S | ELASTO | SBS | Dryflex® |
| Elastron® G G100.D35.B | Elastron USA, Inc. | SEBS | Elastron® G |
| Korton PVDF | Saint Gobain - Norton | PVDF | Korton |
