Order Products : sales@su-jiao.com

Spartech Polycom SCR5-2020

Category:	PP Copolymer , Polypropylene Copolymer
Manufacturer:	Spartech Polycom
Trademark:	Spartech
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gsU8nT_Spartech-Polycom-SCR5-2020.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Spartech SCR5-2020 is a high viscosity PP copolymer resin for injection/extrusion molding that features excellent process stability, superior toughness, and high stiffness. It also exhibits excellent cleanliness and color stability. This product complies with FDA regulations and thus may be safely used in food contact and packaging applications.

Polypropylene is a versatile thermoplastic offering a useful balance of heat and chemical resistance, good mechanical and electrical properties and processing ease. PP is resistant to deformation at elevated temperatures and resistant to impact at low temperatures.

A very versatile product for a wide variety of applications, Spartech SCR5-2020 is recommended for packaging, houseware and consumer product applications.

General Information
Features	Pure/High Purity Rigid, good Copolymer Workability, good Good electrical performance Good color stability Low temperature impact resistance Good chemical resistance Heat resistance, high Good toughness Compliance of Food Exposure Viscosity, High
Uses	Packaging Household goods
Agency Ratings	FDA Food Exposure, Not Rated
Appearance	Available colors Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.898	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)	4.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, 23°C)	21.4	MPa	ASTM D638
Flexural Modulus (23°C)	965	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	690	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	80.0	°C	ASTM D648

Injection	Nominal Value	Unit
Drying Temperature	90.6	°C
Drying Time	1.0	hr
Rear Temperature	216 - 227	°C
Middle Temperature	221 - 232	°C
Front Temperature	227 - 238	°C
Nozzle Temperature	232 - 243	°C
Processing (Melt) Temp	204 - 260	°C
Mold Temperature	26.7 - 37.8	°C

Resin Grade	Manufacturer	Category	Trademark
POLYLAC® PA-765B	CHI MEI CORPORATION	ABS	POLYLAC®
RTP 4006	RTP Company	PPA	RTP
VENYL SE030 - 8229	AD majoris	Nylon 6	VENYL
Kemcor MDX 598	Qenos Pty Ltd	MDPE	Kemcor
Hylex® P1318FRVNHE	Ravago Manufacturing Americas, LLC	PC	Hylex®