Order Products : sales@su-jiao.com
CONATHANE® EN-2534
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONATHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | grTuLH_CONATHANE-EN-2534.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CONATHANE EN-2534 Black is a two-part, non-mercury, fast setting, filled, flexible polyurethane potting system that consists of two low viscosity liquids that have low vapor pressure and good handling properties at room temperature. CONATHANE EN-2534 Black can be cured at room or elevated temperatures without the formation of voids. Low exotherm, low stress build- up during cure, low shrinkage, and excellent electrical properties are other outstanding features of this system. CONATHANE EN-2534 Black is particularly recommended for potting electrical and electronic devices that are subjected to conditions of extreme thermal shock and must also withstand exposure to adverse environments. Even though filled, the low viscosity of this system permits thorough impregnation of electrical and electronic components. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.24 | g/cm³ | |
| -- 2 | 1.44 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 50 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 13.6 | MPa | |
| Tensile Elongation (Break) | 60 | % |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tear Strength | 21.9 | kN/m |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | |||
| -- 3 | 5.3E+12 | ohms | |
| -- 4 | 3.1E+13 | ohms | |
| -- 5 | 5.3E+14 | ohms | |
| Volume Resistivity | |||
| 25°C | 6.1E+13 | ohms·cm | |
| 60°C | 9.2E+11 | ohms·cm | |
| 90°C | 1.1E+11 | ohms·cm | |
| Dielectric Strength | 23 | kV/mm | |
| Dielectric Constant | |||
| 25°C, 100 Hz | 4.39 | ||
| 25°C, 1 kHz | 3.73 | ||
| 25°C, 1 MHz | 3.30 | ||
| 60°C, 100 Hz | 6.14 | ||
| 60°C, 1 kHz | 5.57 | ||
| 60°C, 1 MHz | 3.46 | ||
| Dissipation Factor | |||
| 25°C, 100 Hz | 0.19 | ||
| 25°C, 1 kHz | 0.073 | ||
| 25°C, 1 MHz | 0.026 | ||
| 60°C, 100 Hz | 0.083 | ||
| 60°C, 1 kHz | 0.092 | ||
| 60°C, 1 MHz | 0.062 | ||
| Arc Resistance | > 120 | sec |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 100 | ||
| Resin | Mix Ratio by Weight: 20 | ||
| Thermoset Mix Viscosity | |||
| 25°C 6 | 2200 | cP | |
| 25°C 7 | 6000 | cP | |
| 25°C 8 | 200 | cP |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | Hardener |
| 3 . | 90°C |
| 4 . | 60°C |
| 5 . | 25°C |
| 6 . | Mix |
| 7 . | Hardener |
| 8 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics EL-552 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| TES J-50/30 NAT | Techmer Engineered Solutions | PC | TES |
| Carboprene® 1040AVD GRIGIO160 | SO.F.TER. SPA | PP Homopolymer | Carboprene® |
| LUVOCOM® 1100-7721/WT9016 | Lehmann & Voss & Co. | PESU | LUVOCOM® |
| TECACOMP® PA66 ID blue 4067 | Ensinger GmbH | Nylon 66 | TECACOMP® |
