Order Products : sales@su-jiao.com
Diofan® A 602
| Category: | PVDC , Polyvinylidene Chloride |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Diofan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gqyFSP_Diofan-A-602.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DIOFAN®A602 is an aqueous dispersion of polyvinylidene chloride copolymer. It does not contain solvents, alkylphenol polyoxyethylene ethers or any other toxic substances. It has strong water vapor barrier performance and extremely low water absorption. DIOFAN®A602 also has very good oil resistance and benzene resistance. Since the MFFT is very low, this aqueous adhesive can be applied to a flexible, non-tacky thin upper film at low temperatures. DIOFAN®A602, as a chlorine-based latex, also combines fire and flame retardant properties. End use:
The substrate can be concrete, cement, wood, gypsum, paper, and fiberboard. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| pH | 4.0 | ||
| Surface Tension | 33 | mN/m | |
| Film formation- Minimum film forming temperature | 5 | °C | |
| Solids Content | 55 | % | |
| Density | |||
| Dispersion (wet) | 1.260 | g/cm³ | |
| Coating (dry) | 1.580 | g/cm³ | |
| Emulsion type | anion | ||
| Viscosity- Shear gradient 250 seconds -1 (23°C) | 19 | mPa·s |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen transfer rate- (25°C, 0% RH, 1 µm) | > 1000 | cm³/m²/bar/24 hr | ASTM D3985 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life | 12 | month |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Vapor Transmission Rate (38°C, 90% RH, 1.0 µm) | 160 | g/m²/24 hr | ASTM F1249 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | 7.00 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| 配送及存放 DIOFAN® A602 一般以液态或中型散装容器（ IBC） 的形式供应。液态乳胶存放于不锈钢、HDPE、硬质PVC或玻纤增强聚酯制成的贮存器。特别要避免金属，如铁、锌、铝、铜以及合金如黄铜和青铜与分散体接触。为防止蒸发干燥，应保持容器密闭。为避免降解，产品存放温度最好在10和25℃之间。 法规信息 DIOFAN ® A602生产用单体符合2011年1月14日欧盟委员会条例第10 / 2011的要求。 DIOFAN® A602 完全符合美国联邦食品、药品、化妆品法案及所有食品添加剂适用条例。 DIOFAN® A602 生产用单体符合欧洲议会（EC ）签署的1907 / 2006法规及其理事会于2006年12月18日签署的有关的化学品注册、评估、授权和限制法规（REACH。 SolVin将根据需要提供进一步认证文件. ISO 认证： 在Tavaux生产的DIOFAN偏二氯乙烯共聚物（PVDC）的生产、内部转移及交付、设计和开发管理体系的实施经评估，符合 ISO 9001： 2008、 ISO 14001： 2004 和OHSAS18001：007的要求。 |
| Note Message | |
|---|---|
| 1 . | Films |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® CP-18926 | Teknor Apex Company | TPE | Monprene® |
| TITANPRO® SM498 | Lotte Chemical Titan (M) Sdn. Bhd. | PP Random Copolymer | TITANPRO® |
| Ultramid® 8233G HS BK-102 | BASF Corporation | Nylon 6 | Ultramid® |
| Hifax TYC 852X GREY | LyondellBasell Industries | TPO (POE) | Hifax |
| Delene 2060 | Shanghai Lin Gen Rubber Materials Co., Ltd. | TPE | Delene |
