Order Products : sales@su-jiao.com
Generic Nylon 612 - Glass Bead
| Category: | Nylon 612 , Polyamide 612 |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gqxEGL_Generic-Nylon-612---Glass-Bead.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 612 - Glass Bead This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 - 1.53 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.35 - 0.55 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 2730 - 6960 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 21 - 96 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 60.0 - 243 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 76.7 - 82.3 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Nylon 612 - Glass BeadThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Baydur® STR/C-1000 | Covestro - PUR | PUR-MDI | Baydur® |
| ASTALAC™ ABS ARF | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| CoREZYN® COR31-DA-470 | Interplastic Corporation | Polyester, TS | CoREZYN® |
| SD POLYCA™ LD2050-AAH14 | Sumika Styron Polycarbonate Limited | PC | SD POLYCA™ |
| ESTOPLAST EP 1500BB01 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
