Order Products : sales@su-jiao.com
Tool-A-Thane UT-705
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Urethane Tooling & Engineering Corp |
| Trademark: | Tool-A-Thane |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gqWiRS_Tool-A-Thane-UT-705.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | |
| Molding Shrinkage - Flow | 1.5 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 75 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction 1(vs. Steel - Dynamic) | > 0.80 | ||
| Abrasion Resistance - NBS Index | < 50.0 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Graves Tear | 61.3 | kN/m |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Penetration Depth - Recommended for optimum life | 40 | % |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| 100% Strain | 3.62 | MPa | |
| 300% Strain | 7.24 | MPa | |
| Tensile Strength | 41.4 | MPa | |
| Tensile Elongation (Break) | 580 | % | |
| Tear Strength (Split) | 11 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Brittleness Temperature | -67.8 | °C |
| Note Message | |
|---|---|
| 1 . | at 20 lbs load at 52 fpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SBB3707 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| ULTEM™ MD141 resin | SABIC Innovative Plastics Europe | PEI | ULTEM™ |
| Ferro PP TPP40AJ32BK | Ferro Corporation | PP Homopolymer | Ferro PP |
| ESENTTIA 40H92-SBC | Polipropileno del Caribe S.A. | PP Homopolymer | ESENTTIA |
| RTP 205.3 B | RTP Company | Nylon 610 | RTP |
