Order Products : sales@su-jiao.com
SD POLYCA™ CR3241-10G
| Category: | PC+PET , Polycarbonate + PET |
| Manufacturer: | Sumika Styron Polycarbonate Limited |
| Trademark: | SD POLYCA™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gnRPdm_SDPOLYCACR324110G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SD POLYCA CR series are PC/Polyester alloy grades. These products have improved chemical resistant property in addition to high impact property and heat resistant property of polycarbonate resin. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Part Marking Code |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.28 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (280°C/1.2 kg) | 4.00 | cm³/10min | ISO 1133 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.30 - 0.50 | % | ASTM D955 |
| Transverse flow | 0.30 - 0.50 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 125 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3900 | MPa | ISO 527-2 |
| Tensile Strength | |||
| -- | 78.0 | MPa | ASTM D638 |
| -- | 79.0 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Fracture | 4.0 | % | ASTM D638 |
| Fracture | 5.0 | % | ISO 527-2 |
| Flexural Modulus | |||
| -- | 3740 | MPa | ASTM D790 |
| -- | 3800 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 98.0 | MPa | ASTM D790 |
| -- | 100 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 6.0 | kJ/m² | ISO 179 |
| Notched Izod Impact (23°C) | 98 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 145 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 135 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 130 | °C | ISO 75-2/A |
| Linear thermal expansion coefficient | ASTM D696 | ||
| Flow | 4.0E-5 | cm/cm/°C | ASTM D696 |
| Lateral | 7.0E-5 | cm/cm/°C | ASTM D696 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SZF4669A | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| Sumikon® EME-7351LS | Sumitomo Bakelite Co., Ltd. | Epoxy | Sumikon® |
| Weatherflex™ CS7524WX NTL01P | Colorite Polymers | PVC, Flexible | Weatherflex™ |
| ELASTOSIL® LR 3153 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| Infino UF-1017S | SAMSUNG SDI CO., LTD. | PC | Infino |
