Order Products : sales@su-jiao.com
Elastollan® B 60 A 10 WHTSG 000
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | BASF Polyurethanes GmbH |
| Trademark: | Elastollan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gkLMzz_Elastollan-B-60-A-10-WHTSG-000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thermoplastic Polyester-Polyurethane with excellent mechanical properties, outstanding wear resistance, high tear and tensile strength, good damping characteristic, high resilience performance and superior low temperature flexibility. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 3 sec) | 60 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 100 | mm³ | ISO 4649-A |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | DIN 53504-S2 | ||
| 20% Strain | 1.00 | MPa | |
| 100% Strain | 2.50 | MPa | |
| 300% Strain | 6.50 | MPa | |
| Tensile Stress (Yield) | 25.0 | MPa | DIN 53504-S2 |
| Tensile Elongation (Break) | 900 | % | DIN 53504-S2 |
| Tear Strength 1 | 45 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 25 | % | |
| 70°C, 24 hr | 40 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Suggested Max Moisture | 0.020 | % | |
| Hopper Temperature | 40.0 | °C | |
| Rear Temperature | 175 to 185 | °C | |
| Middle Temperature | 180 to 195 | °C | |
| Front Temperature | 185 to 195 | °C | |
| Nozzle Temperature | 190 to 200 | °C | |
| Processing (Melt) Temp | 185 to 195 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C | |
| Injection Rate | Slow | ||
| Back Pressure | 5.00 to 15.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sevrene® 3000-50A | Vi-Chem Corporation | TPE | Sevrene® |
| Sinvicomp SBF5758 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Trithene® JX 7300 | Petroquimica Triunfo | LDPE | Trithene® |
| NEFTEKHIM PP 4340N (EP2X49GA) | Nizhnekamskneftekhim Inc. | PP Copolymer | NEFTEKHIM PP |
| ALTECH® ABS A 1000/627 UV | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
