Order Products : sales@su-jiao.com
Jam HDPE HM5010T3N NATURAL
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | giQU9W_Jam-HDPE-HM5010T3N-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam HDPE HM5010T3N NATURAL is a High Density Polyethylene product. It is available in Africa & Middle East. Typical application: Plumbing/Piping/Potable Water. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.944 to 0.948 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.8 to 13 | g/10 min | ISO 1133 |
| Flow Rate Ratio 1 | 21.0 to 27.0 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hydrostatic Strength 2(80°C) | 5000 | hr | ISO 1167 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Compression Molded) | > 22 | kJ/m² | ISO 179/1eA |
| Note Message | |
|---|---|
| 1 . | 5/2.16, FRR values are statistical and calculated by dividing MFR values. |
| 2 . | 4.5 N/mm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Buna® EP G 8850 | LANXESS Corporation | EPDM | Buna® EP |
| Fainplast PVC MPH 57/Y | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| ICORENE® N9602 | ICO Polymers EMEA, A Division of A. Schulman | Nylon 6 | ICORENE® |
| Latishield 66-08A G/25-V0KB1 | LATI S.p.A. | Nylon 66 | Latishield |
| LOXIM 831 02T HB | LOXIM Industries Private Limited | PP Copolymer | LOXIM |
