Order Products : sales@su-jiao.com
Telcar® DE 7052
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Telcar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ghzKiN_Telcar-DE-7052.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Telcar®DE 7052 is a thermoplastic elastomer (TPE) material,. This product is available in the Asia-Pacific region and is processed by extrusion or injection molding. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.00 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 3.00 | MPa | ASTM D412 |
| 300% strain | 5.00 | MPa | ASTM D412 |
| Tensile Strength (Break) | 5.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 380 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 40.0 - 80.0 | °C | |
| Rear Temperature | 140 - 180 | °C | |
| Middle Temperature | 140 - 180 | °C | |
| Front Temperature | 140 - 180 | °C | |
| Mold Temperature | 40.0 - 60.0 | °C | |
| Injection Pressure | 2.07 - 20.7 | MPa | |
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Purging Material: HDPE, PP |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 40.0 - 80.0 | °C | |
| Cylinder Zone 1 Temp. | 140 - 180 | °C | |
| Cylinder Zone 2 Temp. | 140 - 180 | °C | |
| Cylinder Zone 3 Temp. | 140 - 180 | °C | |
| Cylinder Zone 4 Temp. | 140 - 180 | °C | |
| Cylinder Zone 5 Temp. | 140 - 180 | °C |
| Extrusion instructions |
|---|
| Compression Ratio: 2.0 to 4.0Purging Material: HDPE, PPLD Ratio: 25:1 or higher |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| REVOLVE® M-732 | Matrix Polymers | PE, Unspecified | REVOLVE® |
| STELACOAT FA-2500/FB-2500 | DIC Corporation | PUR, Unspecified | STELACOAT |
| Titacon® CF910 | Titan Plastics Compounds Co., Ltd. | Acetal (POM) Copolymer | Titacon® |
| Dryflex® C1 5065 | ELASTO | TPE | Dryflex® |
| Gallonprene® GP520-5007 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
