Order Products : sales@su-jiao.com

Mirakutoran® TPU C665MNAT

Category:	TPU Alloy , Thermoplastic Polyurethane Elastomer Alloy
Manufacturer:	Japan Mirakutoran Inc.
Trademark:	Mirakutoran® TPU
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ggF6LE_Mirakutoran-TPU-C665MNAT.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Our TPU "Mirakutoran ®" has the following outstanding features. Has excellent wear resistance Tensile strength, high mechanical strength and tear strength Is a wide range of hardness High impact strength Oil resistance and good chemical resistance Excellent low temperature properties, weather resistance, ozone resistance and is also good Flexible rubber elastic, vibration-effective silencing Compared to other urethane elastomer thermoplastic that is more Playback can be processed Vulcanization process without curing reaction, very high productivity Resins and other polymer is easy Solution is easily dissolved in solvent process Mirakutoran to the standard type E and P are two types. Type E has a certain cross-linked structure in the molecule, and excellent mechanical strength and compression set. P type is characterized by good liquidity linear structure

Message

Our TPU "Mirakutoran ®" has the following outstanding features.

Has excellent wear resistance

Tensile strength, high mechanical strength and tear strength

Is a wide range of hardness

High impact strength

Oil resistance and good chemical resistance

Excellent low temperature properties, weather resistance, ozone resistance and is also good

Flexible rubber elastic, vibration-effective silencing

Compared to other urethane elastomer thermoplastic that is more

Playback can be processed

Vulcanization process without curing reaction, very high productivity

Resins and other polymer is easy

Solution is easily dissolved in solvent process

Mirakutoran to the standard type E and P are two types.

Type E has a certain cross-linked structure in the molecule, and excellent mechanical strength and compression set. P type is characterized by good liquidity linear structure

General Information
Features	Low compressive deformability Shock absorption Impact resistance, good Good strength Good flexibility Good tear strength Ozone resistance Low temperature resistance Good chemical resistance Good wear resistance Good weather resistance Heat resistance, high Oil resistance

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.17	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 23°C, 2.00mm, injection molding)	63 - 67		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(100% strain, 23°C, 2.00mm)	4.40	MPa	ASTM D412
Tensile Strength ²(Yield, 23°C, 2.00 mm)	10.0	MPa	ASTM D412
Tensile Elongation ³(Break, 23°C, 2.00 mm)	400	%	ASTM D412
Tear Strength ⁴(23°C, 2.00 mm)	49.0	kN/m	ASTM D624

Additional Information
Test Methods: JIS K7311, K6262, K7206

Note Message
1 .	300 mm/min
2 .	300 mm/min
3 .	300 mm/min
4 .	300 mm/min

Resin Grade	Manufacturer	Category	Trademark
S&E PVC GA-1055	S&E Specialty Polymers, LLC	PVC, Unspecified	S&E PVC
Staramide ALY430A	Eurostar Engineering Plastics	Nylon 66	Staramide
Sylvin 8696-70DB Clear 876 Dry Blend	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
TRISTAR® PC-30GF	Polymer Technology and Services, LLC	PC	TRISTAR®
Evoprene™ GF 6250	AlphaGary	SBC	Evoprene™ GF