Order Products : sales@su-jiao.com

ALCUDIA® LDPE 1970M

Category:	LDPE , Low Density Polyethylene
Manufacturer:	REPSOL
Trademark:	ALCUDIA® LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gg4ALV_ALCUDIA-LDPE-1970M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALCUDIA® 1970M is a low density polyethylene grade of medium fluidity intended for those injection moulding applications in which good mechanical and good flow properties are required. Its formulation does not contain additives. TYPICAL APPLICATIONS Due to its good properties balance, ALCUDIA® 1970M is a very versatile grade and is suitable for articles of very diverse sizes: Caps and closures. Medium to large sized Industrial parts and components Recommended melt temperature range from 180 to 230°C. Processing conditions should be optimised for each production line.

Message

ALCUDIA® 1970M is a low density polyethylene grade of medium fluidity intended for those injection moulding applications in which good mechanical and good flow properties are required. Its formulation does not contain additives.

TYPICAL APPLICATIONS
Due to its good properties balance, ALCUDIA® 1970M is a very versatile grade and is suitable for articles of very diverse sizes:

Caps and closures.

Medium to large sized Industrial parts and components

Recommended melt temperature range from 180 to 230°C. Processing conditions should be optimised for each production line.

General Information
Features	Additive Free Food Contact Acceptable Medium Flow
Uses	Caps Closures Industrial Applications
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.920	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	7.0	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	47		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	9.00	MPa	ISO 527-2
Tensile Strain (Break)	120	%	ISO 527-2
Flexural Modulus	140	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	90.0	°C	ISO 306/A

Injection	Nominal Value	Unit
Processing (Melt) Temp	180 to 230	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 200 GB 30 TFE 15 SI 2	RTP Company	Nylon 66	RTP
Radilon® A ESL128	Radici Plastics	Nylon 66	Radilon®
Melinex® 531	DuPont Teijin Films U.S.	Polyester, TP	Melinex®
BESTNYL SE35VI01AX	Triesa Plastics	Nylon 66	BESTNYL
Sarlink® TPV 24946DN-1	Teknor Apex Company	TPV	Sarlink® TPV