Order Products : sales@su-jiao.com
Prixene® EA050I65
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | POLYMAT |
| Trademark: | Prixene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gfvxcW_Prixene-EA050I65.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Prixene ® EA050I65 is a high density polyethylene copolymer having a narrow molecular weight distribution. It is intended for injection molding applications where a good balance of processability and end-use properties are required. Typical applications includes cuvettes, containers, multipurpose boxes, industrial parts, household items in large containers. The features presented are good strength and easy processability. This material meets the Food and Drug Administration requirements of 21CFR 177.1520. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | 8.00 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 26.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 800 | % | ASTM D638 |
| Flexural Modulus - Tangent | 1280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (73°C) | 190 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 84.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ 1010TC resin | SABIC Innovative Plastics Asia Pacific | PEI | ULTEM™ |
| VALOX™ V3500EX resin | SABIC Innovative Plastics Europe | PBT | VALOX™ |
| Fluoraz FEPM 790 | Greene, Tweed & Co. | FEP | Fluoraz |
| IDI BMC B30 (Glass Content 25%) | IDI Composites International | TS, Unspecified | IDI BMC |
| Lustran® ABS 256 | INEOS ABS (USA) | ABS | Lustran® ABS |
