Order Products : sales@su-jiao.com
Deltron 5365
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Shanghai Lin Gen Rubber Materials Co., Ltd. |
| Trademark: | Deltron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | geYgiw_Deltron5365.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Deltron 5365 is a polyphenylene sulfide (PPS) material,. This product is available in the Asia-Pacific region and is processed by injection molding. The main features of the Deltron 5365 are:
|
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.80 | g/cm³ | |
| Molding Shrinkage - Flow | 0.20 - 0.50 | % | |
| Water Absorption (Equilibrium) | 0.020 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 100 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 130 | MPa | |
| Tensile Elongation (Break) | 1.6 | % | |
| Flexural Modulus | 12000 | MPa | |
| Flexural Strength | 190 | MPa | |
| Compressive Strength | 150 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 9.00 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 265 | °C | |
| Melting Temperature | 285 | °C | |
| CLTE - Flow | 1.9E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | 1.2E+14 | ohms | |
| Volume Resistivity | 2.5E+16 | ohms·cm | |
| Dielectric Strength | 15 | kV/mm | |
| Dielectric Constant (1 MHz) | 3.20 |
| Flammability | Nominal Value | Unit | |
|---|---|---|---|
| Flame Rating (2.0 mm) | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 140 | °C | |
| Drying Time | 4.0 - 8.0 | hr | |
| Rear Temperature | 240 - 260 | °C | |
| Middle Temperature | 290 - 310 | °C | |
| Front Temperature | 300 - 330 | °C | |
| Mold Temperature | 100 - 140 | °C | |
| Injection Rate | Moderate | ||
| Back Pressure | 60.0 - 80.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYFORT® FPP 3799 | A. Schulman Inc. | PP, Unspecified | POLYFORT® |
| TECHNYL® A 218C V10 NATURAL | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| NYCOA Polyamide 2301 | Nycoa (Nylon Corporation of America) | Nylon+TPE | NYCOA Polyamide |
| HOPELEX PC-1150 | Lotte Chemical Corporation | PC | HOPELEX |
| ISOTHANE® 3095A | Great Eastern Resins Industrial Co Ltd (GRECO) | TPU-Polyether | ISOTHANE® |
