Amodel® AS-1945 HS Datasheet,PPA,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
Amodel AS -1945 HS is a 45% glass fiber reinforced grade polyphthalamide (PPA) resin, specially developed to improve the performance of products in 50/50 ethylene glycol and water environment. When exposed to anti-freezing agents at 226 °F(108 ℃) or even at 275 °F(135 ℃) test temperatures, the performance of this material exceeds the requirements of the automotive industry for polymer materials. It can be used in various auto parts, such as thermostat housing, heater core end cap, heater hose connector and water inlet, power socket and valve lamp. -Black: AS-1945 HS BK 324 natural color: AS-1945 HS NT

General Information
Filler / Reinforcement	Glass fiber reinforced material, 45% filler by weight
Additive	heat stabilizer
Features	Good dimensional stability Rigid, good High strength frost resistance Good creep resistance Good chemical resistance Heat resistance, high Ethylene glycol resistance Thermal Stability
Uses	Power/other tools Valve/valve components Industrial components Industrial application Thick wall fittings (parts) Machine/mechanical parts Metal substitution Parts under the hood of a car Application in Automobile Field Shell
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1)

Physical	Nominal Value	Unit	Test Method
Density	1.57	g/cm³	ISO 1183/A
Molding Shrinkage
Flow ¹	0.20	%	ASTM D955
Transverse flow ²	0.60	%	ASTM D955
Vertical flow direction	0.60	%	ISO 294-4
Flow direction	0.20	%	ISO 294-4

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
-- ³	10300	MPa	ASTM D638
--	15200	MPa	ASTM D638
--	15100	MPa	ISO 527-2
Tensile Strength
Fracture ⁴	107	MPa	ASTM D638
Fracture	252	MPa	ASTM D638
Fracture	244	MPa	ISO 527-2
Tensile Elongation (Break)	2.5	%	ASTM D638
Flexural Modulus
--	13800	MPa	ASTM D790
--	12600	MPa	ISO 178
Flexural Stress
--	335	MPa	ISO 178
Yield	359	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	13	kJ/m²	ISO 179/1eA
Notched Izod Impact
-- ⁵	69	J/m	ASTM D256
--	120	J/m	ASTM D256
--	11	kJ/m²	ISO 180/1A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	282	°C	ASTM D648, ISO 75-2/Af
Melting Temperature	312	°C	ISO 11357-3

Injection	Nominal Value	Unit
Drying Temperature	121	°C
Drying Time	4.0	hr
Suggested Max Moisture	0.10	%
Hopper Temperature	79.4	°C
Rear Temperature	304 - 318	°C
Front Temperature	316 - 329	°C
Processing (Melt) Temp	321 - 343	°C
Mold Temperature	135	°C

Injection instructions
Storage: Amodel® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel® processing guide.

Injection instructions

Storage: Amodel® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel® processing guide.

Note Message
1 .	D2 type
2 .	D2 type
3 .	Impregnate in 50/50 ethylene glycol/water mixture at 275 °F(135°C) for 1000 hours
4 .	Impregnate in 50/50 ethylene glycol/water mixture at 275 °F(135°C) for 1000 hours
5 .	Impregnate in 50/50 ethylene glycol/water mixture at 275 °F(135°C) for 1000 hours

Category:	PPA , Polyphthalamide
Manufacturer:	Solvay Specialty Polymers
Trademark:	Amodel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gcG8dV_Amodel-AS-1945-HS.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Shuang-Bang WM-7508S	Shuang-Bang Industrial Corp.	Film, TPU	Shuang-Bang
Nycal™ 2150R33F1	Technical Polymers, LLC	Nylon 66	Nycal™
Akulon® S223-G4U	DSM Engineering Plastics	Nylon 66	Akulon®
Boltaron 2035	Boltaron Performance Products	PVC, Unspecified	Boltaron
LUVOCOM® 1105-8160	Lehmann & Voss & Co.	PEEK	LUVOCOM®