Order Products : sales@su-jiao.com
Polybilt™ Bitumen Modifier 101
| Category: | LDPE , Low Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Polybilt™ Bitumen Modifier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gbhDGK_Polybilt-Bitumen-Modifier-101.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polybilt 101 is compatible with a large variety of bitumens. For optimum results a preliminary study is recommended to determine the base bitumen grade and optimum Polybilt 101 content to achieve the desired end-use properties. - Boosts binder softening point and decreases penetration. - Gives modified blends with excellent storage stability and handling characteristics. - Particularly recommended for easy mixing in less compatible bitumen. Processing Conditions: Polybilt 101 pellets are free flowing, therefore, well suited for use in automated feeding and metering systems. Polybilt 101 can be blended easily using conventional equipment and does not require a high shear mixer. Blending time depends on the equipment used. Polybilt 101 can be pre-blended with bitumen or poured directly into the pugmill. Recommended blending temperature is 160 - 170°C (320 - 338°F). |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vinyl Acetate Content | 14.0 | wt% | ExxonMobil Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 48.0 | °C | ASTM D1525 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (190°C) | 3100 | mPa·s | ASTM D3236 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCLAIR® 19C | NOVA Chemicals | HDPE | SCLAIR® |
| Telcar® TL-2555F | Teknor Apex Company | TPE | Telcar® |
| NuSil MED-4840 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| APEX® 310 | Teknor Apex Company | PVC, Flexible | APEX® |
| PALMID® R 66 S GF 15 | pal plast GmbH | Nylon 66 | PALMID® |
