Order Products : sales@su-jiao.com
Geon™ Specialty Suspension Impel S100
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ Specialty Suspension |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gbGE8r_Geon-Specialty-Suspension-Impel-S100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon® Impel S100 is a homopolymer specialty suspension resin intended for use in highly plasticized extrusion and injection molding formulations. It gives superior plasticizer absorption properties allowing the production of low durometer compounds. Quick plasticizer uptake provides a reduction of mix time allowing the higher production rate, reducing compounding times and manufacturing costs. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| K-Value 1 | 70.0 | Internal method | |
| Contamination | Internal method | ||
| Dark Particles 2 | 18 | Internal method | |
| Light Colored Particles 3 | 22 | Internal method | |
| Magnetic Particles 4 | 0 | Internal method | |
| Apparent loose density 5 | 0.410 | g/cm³ | Internal method |
| Intrinsic Viscosity 6 | 1.0 | ASTM D1243-60-A | |
| Particle Size | Internal method | ||
| <105 micron 7 | 14.0 | % | Internal method |
| > 250 micron 8 | 4.00 | % | Internal method |
| Average Particle Size 9 | 150 | µm | Internal method |
| Relative Viscosity 10 | 2.37 | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Powder Mix Time 11 | 4.4 | min | Internal method |
| Residual Vinyl Chloride Monomer 12 | ppm | Internal method | |
| Volatiles 13 | 0.070 | % | Internal method |
| polymerization process | Suspension | ||
| Porosity 14 | 0.530 | cm³/g | Internal method |
| Flow time- Conditioned Funnel Flow Time 15 | 34.0 | sec | Internal method |
| Note:The value set forth represent 'typical' values andMexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, netweight 50lbs, 2,500lbs per pallet. Information shown on the package includes commercial identification number, lot, and weight.STP 488 (formulation): 100phr Geon® Impel S100, 55phr TOTM, and 18phr Filler |
| Note Message | |
|---|---|
| 1 . | Interrelationship |
| 2 . | Geon® 1217 |
| 3 . | Geon® 1005 |
| 4 . | Geon® STP 1217Unit: #/100in2 |
| 5 . | Geon® STP 1169 |
| 6 . | Puli 1386 |
| 7 . | Through the 140 net, Geon®812 |
| 8 . | Keep at 40 60 nets, Geon®812 |
| 9 . | Geon® 1458 |
| 10 . | Interrelationship |
| 11 . | Geon® STP 488 (with provided formula) |
| 12 . | Geon® STP 1005 |
| 13 . | Bags, Geon®793 |
| 14 . | Geon® 1094 |
| 15 . | Geon® 1169 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silopren® LSR 3376/50 | Momentive Performance Materials Inc. | Silicone Rubber, LSR | Silopren® |
| VITAMIDE® BF13N2441/2 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Tislamid® PA6 PA6 15 MNF FR | Tisan | Nylon 6 | Tislamid® PA6 |
| VALOX™ HX3091HP resin | SABIC Innovative Plastics | PBT | VALOX™ |
| Anjacom® J350-GF30 | Almaak International GmbH | Nylon 66 | Anjacom® |
