Order Products : sales@su-jiao.com
MIRASON™ 403P
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals, Inc. |
| Trademark: | MIRASON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gaZXC8_MIRASON-403P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MIRASON™ 403P is a Low Density Polyethylene material. It is available in Asia Pacific for injection molding. Primary attribute of MIRASON™ 403P: High ESCR (Stress Crack Resistant). Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 8.73 | MPa | |
| Break | 14.7 | MPa | |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 91.0 | °C | ASTM D1525 |
| Melting Temperature | 108 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Xuchuan XCW-6022NB | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| ARNYL PA6 NERO 30% FV INDUSTRIALE | Daloga srl | Nylon 6 | ARNYL |
| CoolPoly® E5101 | Celanese Corporation | PPS | CoolPoly® |
| Koylene ADL AM018N | Reliance Industries Limited | PP Homopolymer | Koylene ADL |
| Iupiace® AHF6010B | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
