Order Products : sales@su-jiao.com
ROTOLENE S® 95065
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Polimeros Mexicanos s.a. de c.v. |
| Trademark: | ROTOLENE S® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gaGowG_ROTOLENE-S-95065.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
High Density Polyethylene Copolymer, with U.V. stabilizer. Colors: Beige & White. USES: Polyethylene of maximum quality, for manufacture water tanks and other rotomolded parts with the feature that offers excellent opacity allowing the rotomolding of water tanks of a single layer giving a fine finished and uniform texture. The use of opaque materials for the storage of drinking water is highly recommended because delay the growth of algae, bacteria and viruses, so it maintains a high quality of drinking water for longer. This product meet all requirements of the U.S. FDA as specified in 21 C.F.R. 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.942 | g/cm³ | ASTM D1505 |
| Bulk Factor | 0.33 to 0.39 | ASTM D1895 | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | 100 | hr | |
| 100% Igepal | > 1000 | hr | |
| Particle Size - 35 mesh | > 2.00 | % | ASTM D1921 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Impact (3.18 mm) | 200 | J/m | ARM |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pourability | 1500.00 to 2400.00 | g/10 min | ASTM D1895 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 17.9 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 11 | % | ASTM D638 |
| Flexural Modulus 2 | 614 | MPa | ASTM D790B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 52.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | Method I (3 point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Thermoplastic Polyolefin FT2400-648UV | RheTech, Inc. | Polyolefin, Unspecified | RheTech Thermoplastic Polyolefin |
| Anjaflam® 500-FR | Almaak International GmbH | ABS | Anjaflam® |
| EPT 3045 | Mitsui Chemicals, Inc. | EPDM | EPT |
| Hostacom EKC 330N D82513 | LyondellBasell Industries | PP Copolymer | Hostacom |
| HI-ZEX MILLION™ 240M | Mitsui Chemicals, Inc. | HMWPE | HI-ZEX MILLION™ |
