Order Products : sales@su-jiao.com
TECHNYL® B 216 V30 NATURAL
| Category: | Nylon 66/6 , Polyamide 66/6 Copolymer |
| Manufacturer: | Solvay Engineering Plastics |
| Trademark: | TECHNYL® B |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gZT2UU_TECHNYL-B-216-V30-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Copolyamide 66/6, reinforced with 30% of glass fibre, for injection moulding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Multi-Point Data |
|
| Part Marking Code (ISO 11469) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.37 | -- | g/cm³ | ISO 1183/A |
| Water Absorption (23°C, 24 hr) | 0.95 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 9800 | 6500 | MPa | ISO 527-2/1A |
| Tensile Stress | ISO 527-2/1A | |||
| Yield | 185 | 115 | MPa | |
| Break | 185 | 115 | MPa | |
| Tensile Strain | ISO 527-2/1A | |||
| Yield | 3.0 | 6.0 | % | |
| Break | 3.0 | 8.0 | % | |
| Flexural Modulus | 8300 | 4700 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 11 | 16 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 80 | 92 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact Strength | 11 | 19 | kJ/m² | ISO 180/1A |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Melting Temperature | 242 | -- | °C | ISO 11357-3 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 6.0E+14 | 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
| Electric Strength | 30 | 26 | kV/mm | IEC 60243-1 |
| Relative Permittivity | 3.00 | 4.00 | IEC 60250 | |
| Dissipation Factor | 0.020 | 0.10 | IEC 60250 | |
| Comparative Tracking Index | IEC 60112 | |||
| Solution A | 550 | 475 | V | |
| Solution B | 500 | -- | V |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Oxygen Index | 23 | -- | % | ISO 4589-2 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 250 to 260 | °C | |
| Middle Temperature | 260 to 270 | °C | |
| Front Temperature | 270 to 280 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenite™ Acetate 132E5231229 Clear, Trsp | Eastman Chemical Company | CA | Tenite™ Acetate |
| Moplen EP448T | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| Axiall PVC 4520 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Flontech® FT-GL40-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Stat-Tech™ ST7300-0005 | PolyOne Corporation | ABS | Stat-Tech™ |
