Kepital® TX-11H

Category: Acetal (POM) Copolymer , Acetal (POM) Copolymer
Manufacturer: Korea Engineering Plastics Co., Ltd
Trademark: Kepital®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: gY5Sr6_KepitalTX11H.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
High viscosity, lubricant package grade. TX-11H is suitable for use requiring reduced wear noise, and a good friction & wear resistance without sacrificing mechanical properties.
General Information
Features
  • Low friction coefficient
  • Copolymer
  • Good wear resistance
  • Viscosity, High
Processing Method
  • Injection molding
PhysicalNominal ValueUnitTest Method
Density 1.40g/cm³ISO 1183
Melt Mass-Flow Rate (MFR) 5.0g/10 minISO 1133
Molding Shrinkage - Flow (3.00 mm)2.0%ISO 294-4
MechanicalNominal ValueUnitTest Method
Tensile Stress (Break, 23°C)64.0MPaISO 527-2
Nominal Tensile Strain at Break (23°C)40%ISO 527-2
Flexural Modulus (23°C)2550MPaISO 178
Flexural Stress (23°C)86.0MPaISO 178
ImpactNominal ValueUnitTest Method
Charpy Notched Impact Strength 7.5kJ/m²ISO 179/1eA
ThermalNominal ValueUnitTest Method
Heat Deflection Temperature (1.8 MPa, Unannealed)97.0°CISO 75-2/A
ElectricalNominal ValueUnitTest Method
Surface Resistivity 1.0E+16ohmsIEC 60093
Volume Resistivity 1.0E+14ohms·cmIEC 60093
FlammabilityNominal ValueUnitTest Method
Flame Rating HBUL 94
Resin Grade Manufacturer Category Trademark
Stylac™ NF920 Asahi Kasei Chemicals Corporation ACS Stylac™
NuSil CV2-1142 NuSil Technology Silicone NuSil
ALCOM® PC 740/171 GY1127-04LD ALBIS PLASTIC GmbH PC ALCOM® PC
APEX® 95-A0121B-69 Teknor Apex Company PVC, Flexible APEX®
POCAN® BF 4222 000000 LANXESS Corporation PBT POCAN®