Order Products : sales@su-jiao.com
LTM® 24ST
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | LTM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gXifBg_LTM-24ST.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LTM® 24ST is a controlled rheology resin matrix used for the surfacing ply of components moulded from LTM2O series prepregs. The surface ply is partially impregnated to give asymmetric tack. It ensures a flaw-free, smooth surface and a low void content laminate under oven and vacuum bag moulding conditions. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity 1 | 1.23 | g/cm³ |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature | |||
| -- 2 | 75.0 | °C | |
| -- 3 | 125 | °C |
| Note Message | |
|---|---|
| 1 . | Cured resin |
| 2 . | DMA E' onset, 8 hours at 60°C (140°F), dry |
| 3 . | DMA E' onset, 8 hours at 60°C (140°F ) + 2 hours at 120°C (248°F ), dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wondel® P PM6 | Nanjing Julong Engineering Plastics Co., LTD | PP, Unspecified | Wondel® P |
| Bergamid™ A70 G15 HW TM-Z | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Bergamid™ BG6600-8059 RS HS BK001 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Fortron® MT9115L0 DW | Celanese Corporation | PPS | Fortron® |
| EPT 1045 | Mitsui Chemicals, Inc. | EPDM | EPT |
