Order Products : sales@su-jiao.com
SABIC® LLDPE R50035 Series
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | SABIC Americas, Inc. |
| Trademark: | SABIC® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gXXGIz_SABIC-LLDPE-R50035-Series.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Product Description R50035 series resins are Linear Low Density Polyethylene grades designed to provide excellent stress crack resistance, mechanical properties with high rigidity, toughness, gloss and low warpage. R50035 Series includes following grades:
Typical Applications Rotational molding of large industrial and agricultural tanks, trash containers and chemical shipping drums. They are also suitable for injection molding applications like caps, closures and housewares. RG50035 is suitable for producing compounds & masterbatches. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, Injection Molding, F50) | > 150 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant (Injection Molded) | 420 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, injection molding | 16.0 | MPa | ASTM D638 |
| Fracture, injection molding | 17.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 590 | % | ASTM D638 |
| Flexural Strength (Injection Molded) | 13.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 114 | °C | ASTM D1525 |
| Additional Information |
|---|
| Processing Conditions:Oven temperature: 315°C (600°F) |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 - 240 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 300 GB 10 TFE 13 SI 2 | RTP Company | PC | RTP |
| Comai 707-3 NT | Comai Ltda | PP, Unspecified | Comai |
| Huafon JF-HSY-9818 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| Shida 101 | JINJIANG City SHIDA Plastic Fine Co., Ltd. | SBS | Shida |
| 3M™ Dyneon™ Fluoroelastomer FC 2179 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
