Order Products : sales@su-jiao.com

Purac PLA Blend A

Category:	PLA , Polylactic Acid
Manufacturer:	Purac
Trademark:	Purac PLA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gWDXzE_Purac-PLA-Blend-A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Homo PLA: general purpose PLA blends based on monomers from Purac offer: Heat resistance up to 120°C (HDT B) Good processing economics Impact resistance comparable to ABS Biobased content Multiple end-of-life options Existing commercial availability Blend A: the key driver behind this improvement are PLLA homopolymers that have been nucleated with a small amount of PDLA homopolymers and a traditional nucleant (see blend A in the table below for more details). The increased heat performance of blend A was obtained without adding significant amounts of filler.

Message

Homo PLA: general purpose

PLA blends based on monomers from Purac offer:

Heat resistance up to 120°C (HDT B)

Good processing economics

Impact resistance comparable to ABS

Biobased content

Multiple end-of-life options

Existing commercial availability

Blend A: the key driver behind this improvement are PLLA homopolymers that have been nucleated with a small amount of PDLA homopolymers and a traditional nucleant (see blend A in the table below for more details). The increased heat performance of blend A was obtained without adding significant amounts of filler.

General Information
Additive	Nucleating Agent
Features	High Heat Resistance Homopolymer Nucleated Renewable Resource Content
Uses	General Purpose
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit
Density	1.24	g/cm³

Mechanical	Nominal Value	Unit
Tensile Modulus	3000	MPa
Tensile Stress	45.0	MPa
Tensile Strain (Break)	5.0	%

Impact	Nominal Value	Unit
Charpy Notched Impact Strength (23°C)	5.0	kJ/m²

Thermal	Nominal Value	Unit
Heat Deflection Temperature ¹(0.45 MPa, Unannealed)	105	°C

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 220	°C
Mold Temperature	80.0 to 100	°C

Note Message
1 .	Flatwise

Resin Grade	Manufacturer	Category	Trademark
RTP 400 HI	RTP Company	PS (HIPS)	RTP
MonoSol® AF A127	MonoSol, LLC	PVOH	MonoSol®
TPSiV™ 3345-65A NAT 25564	Multibase, A Dow Corning Company	TPSiV	TPSiV™
Calprene® 719	Dynasol Elastomers	SBS	Calprene®
P-BLEND XS100	Putsch Kunststoffe GmbH	PC+ABS	P-BLEND