Order Products : sales@su-jiao.com
RTP EMI 2261
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gVT8gl_RTP-EMI-2261.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.90 - 1.0 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.15 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4480 | MPa | ASTM D638 |
| Tensile Strength | 82.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 6.0 | % | ASTM D638 |
| Flexural Modulus | 4480 | MPa | ASTM D790 |
| Flexural Strength | 138 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1100 | J/m | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 5.0E+3 | ohms | ASTM D257 |
| Volume Resistivity | 10 | ohms·cm | ASTM D257 |
| Additional Information |
|---|
| Tensile Elongation, ASTM D638: 5-7%Volume Resistivity, ASTM D257: 0.1-10 ohm-cmSurface Resistivity, ASTM D257: 1E2-1E5 ohms/sq |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 357 - 427 | °C | |
| Middle Temperature | 357 - 427 | °C | |
| Front Temperature | 357 - 427 | °C | |
| Mold Temperature | 149 - 204 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6 7500 GF 35 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| TRIMMA® SD6380H | Samyang Corporation | Acrylic (PMMA) | TRIMMA® |
| NORYL™ NH6010B resin | SABIC Innovative Plastics | PPE+PS | NORYL™ |
| Ferro PP LPP30BV02NA | Ferro Corporation | PP, Unspecified | Ferro PP |
| KOPET® KP133G15BU | Kolon Plastics, Inc. | PET | KOPET® |
