Order Products : sales@su-jiao.com
Maxelast® F02-129E-1C
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Nantong Polymax Elastomer Technology, Co., Ltd |
| Trademark: | Maxelast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gUg8nZ_Maxelast-F02-129E-1C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Maxelast®F02-129E-1C is a thermoplastic elastomer (TPE) material,. This product is available in North America, Europe or Asia Pacific region. The processing method is injection molding. Maxelast®The main features of the F02-129E-1C are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 8.08 | MPa | ASTM D412 |
| 300% strain | 8.30 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 10.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 670 | % | ASTM D412 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP HI5303A | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| ACRYLITE® Resist ZK-X | Evonik Cyro LLC | Acrylic (PMMA) | ACRYLITE® |
| Braskem PE GM5010T2 | Braskem | HDPE | Braskem PE |
| Andur 9000-AP/Curene® 185 | Anderson Development Company | PUR-Ether/TDI | Andur |
| Gallonprene® GP210-3002L | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
