Order Products : sales@su-jiao.com
Generic DAP - Glass Fiber
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gT01uR_Generic-DAP---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic DAP - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.82 - 1.91 | g/cm³ | ASTM D792 |
| Bulk Factor | 2.3 - 6.0 | ASTM D1895 | |
| Molding Shrinkage - Flow (23°C) | 0.20 - 0.31 | % | ASTM D955 |
| Water Absorption (Saturation, 23°C) | 0.25 - 0.27 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 48.3 - 55.2 | MPa | ASTM D638 |
| 23°C | 75.3 - 83.0 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 11700 - 12500 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | ||
| 23°C | 123 - 131 | MPa | ASTM D790 |
| Yield, 23°C | 96.5 - 104 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 149 - 188 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 27 - 240 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 204 - 274 | °C | ASTM D648 |
| CLTE - Flow | |||
| -- | 1.8E-5 - 2.5E-5 | cm/cm/°C | ASTM D696 |
| -- | 1.8E-5 - 2.1E-5 | cm/cm/°C | ASTM E831 |
| Thermal Conductivity (23°C) | 0.28 - 0.36 | W/m/K | ASTM C177 |
| RTI Elec | 130 - 132 | °C | UL 746 |
| RTI Imp | 130 - 132 | °C | UL 746 |
| RTI | 130 - 132 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (23°C) | 14 - 18 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 3.50 - 4.40 | ASTM D150 | |
| Dissipation Factor (23°C) | 8.8E-3 - 0.016 | ASTM D150 | |
| Arc Resistance | 130 - 180 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 26 - 50 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 113 - 150 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic DAP - Glass FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEETEC EVA VS410 | Lotte Chemical Corporation | EVA | SEETEC EVA |
| Sinpolene GPP1630 | Teknor Apex Asia Pacific PTE. LTD. | PP Homopolymer | Sinpolene |
| SLOVAMID® 6 GF 25 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Cellidor CP 310-10 | ALBIS PLASTIC GmbH | CAP | Cellidor |
| LNP™ STAT-KON™ DEP23FXC compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
