Order Products : sales@su-jiao.com
Sumitomo Epoxy E 9405H-1
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo Epoxy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gSsG1e_Sumitomo-Epoxy-E-9405H-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| E-9504H-1 is glass fiber filled epoxy molding compound designed for encapsulation of delicate electrical components as well as large coils. Excellent thermal shock, moldability, and retention of electrical properties under humid conditions are the outstanding features of this material. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.70 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (Compression Molded) | 0.50 to 0.70 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.11 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 82.0 | MPa | ASTM D638 |
| Flexural Modulus (Compression Molded) | 11700 | MPa | ASTM D790 |
| Flexural Strength (Break) | 123 | MPa | ASTM D790 |
| Compressive Strength | 220 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 31 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 3.2E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | ASTM D149 | ||
| -- 2 | 13 | kV/mm | |
| -- 3 | 13 | kV/mm | |
| Dielectric Constant 4(1 MHz) | 3.70 | ASTM D2520 | |
| Dissipation Factor 5(1 MHz) | 0.020 | ASTM D150 | |
| Arc Resistance | 190 | sec | ASTM D495 |
| Note Message | |
|---|---|
| 1 . | Wet, 60 Hz |
| 2 . | Method A (Short-Time) |
| 3 . | Method B (Step-by-Step) |
| 4 . | Wet |
| 5 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zhongfa PA66 DD2 | Yuyao Zhongfa Engineering Plastics Co. Ltd. | Nylon 6 | Zhongfa |
| Fainplast CTX 70/S | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Fainplast |
| Geon™ HC 2195G | PolyOne Corporation | PVC, Flexible | Geon™ HC |
| LTP ZC-1600A | Chengdu Letian Plastics Co., Ltd | PPS | LTP |
| ULTEM™ ATX3562R resin | SABIC Innovative Plastics | PEI+PCE | ULTEM™ |
