Order Products : sales@su-jiao.com
INEOS PP H03W-01
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gS1VBh_INEOS-PP-H03W-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| H03W-01 is a homopolymer polypropylene specifically designed for fiber applications which require low-water-carryover characteristics coupled with good melt and thermal stability in the finished product. Typical applications for H03W-01 include cordage, carpet backing, industrial fabrics, and geotextiles. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.915 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.6 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 96 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 37.2 | MPa | |
| Break | 17.9 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 8.6 | % | |
| Break | 97 | % | |
| Flexural Modulus - 1% Secant | 1790 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 38 | J/m | ASTM D256 |
| Notched Izod Impact (Area) (23°C) | 3.75 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 108 | °C | ASTM D648 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°) | 93 | ASTM D2457 | |
| Haze 3(1270 µm) | 78 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 23°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VICTREX® PEEK 90HMF40 | Victrex plc | PEEK | VICTREX® PEEK |
| Ultramid® A3X2G10 | BASF Corporation | Nylon 66 | Ultramid® |
| Novalloy-A A5566 | PlastxWorld Inc. | ABS+Nylon | Novalloy-A |
| Bakelite® UP 3415 | Hexion Inc. | Polyester, TS | Bakelite® |
| HiPrene® M560ST | GS Caltex | PP Impact Copolymer | HiPrene® |
