Order Products : sales@su-jiao.com
CABELEC® CA4857
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | Cabot Corporation |
| Trademark: | CABELEC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gRhid5_CABELEC-CA4857.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CABELEC® 4857 is an electrically conductive compound based on conductive carbon black dispersed in a modified styrenic resin. The electrical properties are permanent and are not dependent on atmospheric conditions. CABELEC® 4857 has been specially designed for packaging and electronic product handling where freedom from the hazard of electrostatic discharge is necessary. Examples of use are in handling of explosives, electronic components and pigments. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.09 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) 2 | ISO 1133 | ||
| 200°C/10.0 kg | 6.0 | g/10 min | |
| 200°C/21.6 kg | 67 | g/10 min | |
| 200°C/5.0 kg | 1.0 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 3(Shore D, 15 sec) | 73 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 4 | ISO 527-2 | ||
| Yield | 25.8 | MPa | |
| Break | 20.4 | MPa | |
| Tensile Strain 5(Break) | 25 | % | ISO 527-2 |
| Flexural Modulus 6 | 2020 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength 7(23°C) | 9.0 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 8(1.8 MPa, Unannealed) | 67.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature 9 | 100 | °C | ISO 306/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 10 | 5.0E+3 | ohms | Internal Method |
| Volume Resistivity 11 | 1.0E+2 | ohms·cm | Internal Method |
| Surface Resistance 12(400.0 µm) | 1000 | ohms | Internal Method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Cylinder Zone 1 Temp. | 170 to 200 | °C | |
| Cylinder Zone 2 Temp. | 170 to 200 | °C | |
| Cylinder Zone 3 Temp. | 170 to 200 | °C | |
| Cylinder Zone 4 Temp. | 170 to 200 | °C | |
| Cylinder Zone 5 Temp. | 170 to 200 | °C | |
| Melt Temperature | < 230 | °C |
| Note Message | |
|---|---|
| 1 . | CTM E023 |
| 2 . | CTM E005 |
| 3 . | CTM E030 |
| 4 . | CTM E041 |
| 5 . | CTM E041 |
| 6 . | CTM E040A |
| 7 . | CTM E044A |
| 8 . | CTM E038 |
| 9 . | CTM E039 |
| 10 . | CTM E042E |
| 11 . | CTM E043B |
| 12 . | CTM E042D, Extruded Tape |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PA6 A 2015/512 GF15 IM UV | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| HiFill® PS GF20 | Techmer Engineered Solutions | PS (GPPS) | HiFill® |
| HIPEX® HX8ICN (Series: HTR/OR) | KRAIBURG TPE | TPE | HIPEX® |
| Latigray 52/11-01 CX/45 | LATI S.p.A. | PP Homopolymer | Latigray |
| KumhoSunny ABS HFA700 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS | KumhoSunny ABS |
