Lusin® Clean G 410

Category:	Unspecified , Unspecified
Manufacturer:	Chem-Trend L.P.
Trademark:	Lusin®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gRUDgI_Lusin-Clean-G-410.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
High Temperature Purging Compound Benefits Suitable for all plastics with processing temperatures between 250°C/482°F and 410°C/770°F, e.g., PC, PEEK, PES, PEI, etc. Low consumption Rapid cleaning effect Suitable for use on hot runners Dosage Table Screw Diameter // Required quantity of Lusin® Clean G 410 20 mm // 0.4 kg/0.88 lb 30 mm // 0.8 kg/1.76 lb 40 mm // 1.6 kg/3.52 lb 60 mm // 2.8 kg/6.16 lb 80 mm // 5.0 kg/11.0 lb 100 mm // 10.0 kg/22.0 lb Description Lusin® Clean G 410 is a granular ready-to-use purging compound for the screws, cylinders and nozzles of thermoplastic injection moulding machines. It is based on high-grade plastics with additives and contains no abrasives. Lusin® Clean G 410 can be used at operating temperatures in the range between 250°C/482°F and 410°C/770°F and is suitable for cleaning hot runners, particularly with external heaters. Application Instructions Applied at the correct operating temperature, Lusin® Clean G 410 removes residues and encrustations on screws, cylinders and nozzles. Cleaning with this product during color change results immediately in clean parts and reduces scrap. The processing procedure is as follows: 1. The required quantity of purging compound can be found in the Dosage Table. 2. Empty cylinder. 3. Fill hopper with Lusin® Clean G 410. Cleaning temperature should be set at the previous materials processing temperature. 4. To minimize odor, use low backpressure to inject the purging compound. To facilitate rapid cooling of the emerging material, it is recommended material be fed into a water bath. 5. Fill new plastic material into hopper. Set new processing temperature. Inject the rest of the purging compound and start normal production Storage/Handling Lusin® Clean G 410 has a shelf life of two (2) years and should be stored its in original sealed packing in a dry indoor area. For further information on storage, handling, hazards, please request a copy of Chem-Trend's Material Safety Data Sheet. Packaging Lusin® Clean G 410 is available in 25 kg. bags.

Message

High Temperature Purging Compound

Benefits

Suitable for all plastics with processing temperatures between 250°C/482°F and 410°C/770°F, e.g., PC, PEEK, PES, PEI, etc.

Low consumption

Rapid cleaning effect

Suitable for use on hot runners

Dosage Table
Screw Diameter // Required quantity of Lusin® Clean G 410
20 mm // 0.4 kg/0.88 lb
30 mm // 0.8 kg/1.76 lb
40 mm // 1.6 kg/3.52 lb
60 mm // 2.8 kg/6.16 lb
80 mm // 5.0 kg/11.0 lb
100 mm // 10.0 kg/22.0 lb

Description
Lusin® Clean G 410 is a granular ready-to-use purging compound for the screws, cylinders and nozzles of thermoplastic injection moulding machines. It is based on high-grade plastics with additives and contains no abrasives.

Lusin® Clean G 410 can be used at operating temperatures in the range between 250°C/482°F and 410°C/770°F and is suitable for cleaning hot runners, particularly with external heaters.

Application Instructions
Applied at the correct operating temperature, Lusin® Clean G 410 removes residues and encrustations on screws, cylinders and nozzles. Cleaning with this product during color change results immediately in clean parts and reduces scrap. The processing procedure is as follows:

1. The required quantity of purging compound can be found in the Dosage Table.
2. Empty cylinder.
3. Fill hopper with Lusin® Clean G 410. Cleaning temperature should be set at the previous materials processing temperature.
4. To minimize odor, use low backpressure to inject the purging compound. To facilitate rapid cooling of the emerging material, it is recommended material be fed into a water bath.
5. Fill new plastic material into hopper. Set new processing temperature. Inject the rest of the purging compound and start normal production

Storage/Handling
Lusin® Clean G 410 has a shelf life of two (2) years and should be stored its in original sealed packing in a dry indoor area. For further information on storage, handling, hazards, please request a copy of Chem-Trend's Material Safety Data Sheet.

Packaging
Lusin® Clean G 410 is available in 25 kg. bags.

General Information
Features	High Heat Resistance
Uses	Purging Compound
Forms	Granules
Processing Method	Injection Molding

Resin Grade	Manufacturer	Category	Trademark
SAXATEC™ 4210	SAX Polymers	ASA	SAXATEC™
WanBlend® WHT-THF8475T2	Wanhua Chemical Group Co., Ltd.	TPU-Polyether	WanBlend®
EL-Lene™ H5840B	SCG Chemicals Co., Ltd.	HDPE	EL-Lene™
LNP™ THERMOCOMP™ KF004 compound	SABIC Innovative Plastics	Acetal (POM) Copolymer	LNP™ THERMOCOMP™
Sylvin 9812-82 White 1294	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin