Order Products : sales@su-jiao.com
REPRO HDPE RH120
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Rondo Plast AB |
| Trademark: | REPRO |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gQz31u_REPRO-HDPE-RH120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Standard injection moulding |
| General Information | |
|---|---|
| Recycled Content |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | ISO 2577 | ||
| Across Flow | 1.5 to 3.0 | % | |
| Flow | 1.5 to 3.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 700 | MPa | ISO 178 |
| Flexural Stress | 25.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 10 | kJ/m² | ISO 179 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 230 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C | |
| Injection Pressure | 40.0 to 60.0 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.500 to 1.00 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SolVin 373MC | INOVYN | PVC, Unspecified | SolVin |
| Chemlon® 140 M | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| EVERLON® TP-40D | Ever Polymer Co., Ltd. | SEBS | EVERLON® |
| DINALON® PA 6.6 | Grupo Repol | Nylon 66 | DINALON® |
| Edgetek™ AT-000/000 NC707 | PolyOne Corporation | Acetal (POM) Copolymer | Edgetek™ |
