Order Products : sales@su-jiao.com
ALTECH® PA6 B 2015/100 GF15
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | ALBIS PLASTIC GmbH |
| Trademark: | ALTECH® PA6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gQhgao_ALTECH-PA6-B-2015-100-GF15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALTECH® PA6 B 2015/100 GF15 is a Polyamide 6 (Nylon 6) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.22 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 8.0 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.6 | -- | % | |
| Viscosity Number 1(96% H2SO4 (Sulphuric Acid)) | 148 | -- | cm³/g | ISO 307 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 5400 | -- | MPa | ISO 527-2 |
| Tensile Stress (Break) | 110 | -- | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.2 | -- | % | ISO 527-2 |
| Flexural Modulus | 4800 | -- | MPa | ISO 178 |
| Flexural Stress | 175 | -- | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 6.0 | -- | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 44 | -- | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 202 | -- | °C | ISO 75-2/A |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+16 | -- | ohms·cm | IEC 60093 |
| Comparative Tracking Index | 500 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.50 mm | HB | -- | ||
| 3.00 mm | HB | -- |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 80.0 | °C | |
| Drying Time - Desiccant Dryer | 2.0 to 12 | hr | |
| Suggested Max Moisture | 0.15 | % | |
| Processing (Melt) Temp | 270 to 290 | °C | |
| Mold Temperature | 80.0 to 100 | °C |
| Note Message | |
|---|---|
| 1 . | 5 g/l |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SBB3616 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| THERMOLAST® K TP6HPN (Series: EX/UV) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Epolene® N-34P | Westlake Chemical Corporation | LDPE | Epolene® |
| SCHULABLEND® M/MA 6301 CA U | A. Schulman Europe | ASA+PC | SCHULABLEND® |
| Romiloy® 4010 GF30 | ROMIRA GmbH | ABS+Nylon | Romiloy® |
