Order Products : sales@su-jiao.com
NYCOA Polyamide 446
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gQIIVf_NYCOA-Polyamide-446.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 446 is a high viscosity, nucleated Nylon 6 resin for extrusion processing. Its high viscosity and fast set-up time make NYCOA 446 an excellent material for extrusion of tubing, rods, sheet and film. NYCOA 446 has been approved by Underwriters' Laboratories in thicknesses of 3mm or greater in accordance with specification UL-94 V-2. NYCOA 446 complies with all the requirements of the FDA regulations 21 CFR 177.1500. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 1.7 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 80.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 40 | % | ASTM D638 |
| Flexural Modulus 3 | 2650 | MPa | ASTM D790 |
| Flexural Strength 4 | 115 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 191 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 68.3 | °C | ASTM D648 |
| Melting Temperature | 221 | °C | DSC |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-2 | UL 94 |
| Additional Information |
|---|
| Relative Viscosity, NYCOA Method: 4.0 to 4.4 SAVWater Extractable, NYCOA Method: 0.8 %The value listed as Metling Point DSC, was tested in accordance with ASTM D789. |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BioFibra® BF-LED01 | FuturaMat | Biodeg Polymers | BioFibra® |
| GPP™ 1020E | S&E Specialty Polymers, LLC | TPO (POE) | GPP™ |
| INELEC PEICF10 | Infinity LTL Engineered Compounds | PEI | INELEC |
| PENTAMID A GV15 E H schwarz | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
| VisiJet® FTX Cast | 3D Systems | Unspecified | VisiJet® |
