Order Products : sales@su-jiao.com
Evolue™ SP1521
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Prime Polymer Co., Ltd. |
| Trademark: | Evolue™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gNpXmq_Evolue-SP1521.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Evolue™SP1521 is a linear low density polyethylene product,. It can be processed by blowing film and is available in North America, Europe or Asia Pacific. Evolue™The application areas of SP1521 include packaging, film and agriculture. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.913 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | > 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 54 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 16.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 350 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 160 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength (Injection Molded) | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 96.0 | °C | ISO 306 |
| Melting Temperature (DSC) | 116 | °C | ISO 3146 |
| Additional Information |
|---|
| The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357-3 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BMN P20 D | Arkema | Nylon 11 | Rilsan® |
| Sylvin 5200-83C Natural | Sylvin Technologies Incorporated | PVC, Semi-Rigid | Sylvin |
| DuraMax™ DMX 8080NC | Advanced Polymer Alloys | TPE | DuraMax™ |
| Keltan® 7752C | LANXESS Buna GmbH | EPDM | Keltan® |
| ALCOM® PC 740/4 UV WT1296-07LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
