Order Products : sales@su-jiao.com
Daelim Po1y® TR418BL
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | DAELIM INDUSTRIAL CO., LTD. |
| Trademark: | Daelim Po1y® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gNgq0p_DaelimPo1yTR418BL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Daelim Po1y®TR418BL is a high density polyethylene product,. It is available in Europe or Asia Pacific. Daelim Po1y®TR418BL application areas include sheet and food contact applications. Features include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.947 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.23 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (Molding, F0) | > 2000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 39.2 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | > 600 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 637 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-30°C, Compression Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 123 | °C | ASTM D1525 |
| Peak Melting Temperature | 127 | °C | ASTM D3418 |
| Oxygen sensing time- Al Pan (200°C) | > 60 | min | ASTM D3895 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 190 - 220 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polymer-E F8101 | Asia Polymer Corporation (APC) | LDPE | Polymer-E |
| Shin-Etsu Elastomer KE-2090-10A/B | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| APEX® 3200-75NT | Teknor Apex Company | PVC, Flexible | APEX® |
| Hyundai EP PA66 LD130 | HYUNDAI EP Co., Ltd. | Nylon 66 | Hyundai EP PA66 |
| GELOY™ XP7550 resin | SABIC Innovative Plastics | ASA+PC | GELOY™ |
