Order Products : sales@su-jiao.com
NORYL™ SE1GFN2 resin
| Category: | PPE+PS , Polyphenylene Ether + PS |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | NORYL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gLDIwD_NORYLSE1GFN2resin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPE+PS blend. 20% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 listing. Dielectric strength. Dimensional stability. Suitable for E/E applications. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (280°C/5.0 kg) | 3.5 | g/10 min | ASTM D1238 |
| Melt Volume-Flow Rate (MVR) (280°C/5.0 kg) | 3.00 | cm³/10min | ISO 1133 |
| Molding Shrinkage - Flow (3.20 mm) | 0.20 - 0.50 | % | Internal method |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 0.11 | % | ISO 62 |
| 23°C, 24 hr 1 | 0.040 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 2 | 7100 | MPa | ASTM D638 |
| -- | 6400 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Fracture 3 | 120 | MPa | ASTM D638 |
| Fracture | 100 | MPa | ISO 527-2/50 |
| Tensile Elongation | |||
| Fracture 4 | 3.0 | % | ASTM D638 |
| Fracture | 2.5 | % | ISO 527-2/50 |
| Flexural Modulus | |||
| 50.0mm span 5 | 5500 | MPa | ASTM D790 |
| -- 6 | 5600 | MPa | ISO 178 |
| Flexural Stress | |||
| -- | 150 | MPa | ISO 178 |
| Yield, 50.0mm span 7 | 140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 7.0 | kJ/m² | ISO 179/2C |
| Notched Izod Impact | |||
| -30°C | 90 | J/m | ASTM D256 |
| 23°C | 100 | J/m | ASTM D256 |
| -30°C 8 | 8.0 | kJ/m² | ISO 180/1A |
| 23°C 9 | 9.0 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 520 | J/m | ASTM D4812 |
| -30°C 10 | 27 | kJ/m² | ISO 180/1U |
| 23°C 11 | 28 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact (23°C, Total Energy) | 18.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, unannealed, 3.20mm | 142 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 3.20mm | 134 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 64.0mm span 12 | 133 | °C | ISO 75-2/Af |
| Vicat Softening Temperature | |||
| -- | 142 | °C | ASTM D1525, ISO 306/B50 11 13 |
| -- | 144 | °C | ISO 306/B120 |
| Linear thermal expansion coefficient | |||
| Flow : -40 to 40°C | 2.5E-5 | cm/cm/°C | ASTM E831 |
| Flow : -40 to 40°C | 3.0E-5 | cm/cm/°C | ISO 11359-2 |
| Lateral : -40 to 40°C | 7.5E-5 | cm/cm/°C | ASTM E831, ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.3E+17 | ohms | ASTM D257, IEC 60093 |
| Volume Resistivity | 2.0E+16 | ohms·cm | ASTM D257, IEC 60093 |
| Dielectric Strength | |||
| 1.60 mm, in Oil | 26 | kV/mm | ASTM D149 |
| 1.50, in oil | 26 | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 2.93 | ASTM D150, IEC 60250 | |
| Dissipation Factor (1 MHz) | 3.4E-3 | ASTM D150, IEC 60250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-1 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 - 121 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Drying Time, Maximum | 8.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Suggested Shot Size | 30 - 70 | % | |
| Rear Temperature | 266 - 316 | °C | |
| Middle Temperature | 277 - 321 | °C | |
| Front Temperature | 288 - 327 | °C | |
| Nozzle Temperature | 299 - 327 | °C | |
| Processing (Melt) Temp | 299 - 327 | °C | |
| Mold Temperature | 82.2 - 110 | °C | |
| Back Pressure | 0.345 - 0.689 | MPa | |
| Screw Speed | 20 - 100 | rpm |
| Note Message | |
|---|---|
| 1 . | 50% RH |
| 2 . | 5.0 mm/min |
| 3 . | Type 1, 50mm/min |
| 4 . | Type 1, 50mm/min |
| 5 . | 1.3 mm/min |
| 6 . | 2.0 mm/min |
| 7 . | 1.3 mm/min |
| 8 . | 80*10*4 |
| 9 . | 80*10*4 |
| 10 . | 80*10*4 |
| 11 . | 80*10*4 |
| 12 . | 80*10*4 mm |
| 13 . | 标准 B (120°C/h), 载荷2 (50N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA40 GR25 NL XA60 | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| ALCUDIA® HDPE M5309 | REPSOL | HDPE | ALCUDIA® HDPE |
| Fibremod™ GB205U | Borealis AG | TPO | Fibremod™ |
| Hapweld™ 39 | Hapco Inc. | TP, Unspecified | Hapweld™ |
| Osterlene® PPC-12-1-C | Osterman & Company | PP Random Copolymer | Osterlene® |
