Order Products : sales@su-jiao.com
NORYL™ NC208 resin
| Category: | PPE+PS , Polyphenylene Ether + PS |
| Manufacturer: | SABIC Innovative Plastics Asia Pacific |
| Trademark: | NORYL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gLAc8g_NORYL-NC208-resin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| NORYL™ NC208 resin is a Polyphenylene Ether + PS (PPE+PS) material. It is available in Asia Pacific. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.20 to 0.40 | % | Internal Method |
| Water Absorption (24 hr) | 0.060 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 88 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 78.5 | MPa | Internal Method |
| Tensile Elongation (Break) | 4.0 to 6.0 | % | Internal Method |
| Flexural Modulus | 4900 | MPa | ASTM D790 |
| Flexural Strength | 118 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 58 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.20 mm) | 132 | °C | ASTM D648 |
| CLTE - Flow (-30 to 30°C) | 3.9E-5 to 5.8E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+8 to 1.0E+12 | ohms | ASTM D257 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sasol Polymers PP HRV100 | Sasol Polymers | PP Homopolymer | Sasol Polymers PP |
| SUPREME Specialty PS SP554 | Supreme Petrochem Ltd. | PS (IRPS) | SUPREME Specialty PS |
| TRIREX® 3020PJ | Samyang Corporation | PC | TRIREX® |
| DIALAC® E310 | UMG ABS, Ltd. | ASA | DIALAC® |
| ULTEM™ HU1110 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
