Order Products : sales@su-jiao.com

SILVER® SA-1302

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Guangdong Silver Age Sci & Tech. Co., Ltd
Trademark:	SILVER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gKswZK_SILVER-SA-1302.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SlLVER® SA-1000 elastomer is a kind of thermoplastic elastomer comprising of unsaturated styrene—butadiene rubber for indoor room temperature applications, such as toys, clear product, bearing seals and sole, which is similar to thermoset rubber in physical properties. And SA—1000 elastomer can be injected or extruded on thermoplastic equipment. SA—1000 Elastomer (Unsaturated Styrene—butadiene Rubber) Characteristics: similar to thermoset rubber in physical properties Applications: toys, seal ring, cushion blocking, insole, sole, fender board, cap of pen, truckle, tire and so on

Message

SlLVER® SA-1000 elastomer is a kind of thermoplastic elastomer comprising of unsaturated styrene—butadiene rubber for indoor room temperature applications, such as toys, clear product, bearing seals and sole, which is similar to thermoset rubber in physical properties. And SA—1000 elastomer can be injected or extruded on thermoplastic equipment.

SA—1000 Elastomer (Unsaturated Styrene—butadiene Rubber)

Characteristics:

similar to thermoset rubber in physical properties

Applications:

toys, seal ring, cushion blocking, insole, sole, fender board, cap of pen, truckle, tire and so on

General Information
Features	Copolymer
Uses	Caps Footwear Seals Tires Toys
Appearance	Natural Color
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.05	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	17	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 3 sec)	55		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹	3.60	MPa	ASTM D638
Tensile Elongation ²(Break)	> 300	%	ASTM D638

Injection	Nominal Value	Unit
Processing (Melt) Temp	160 to 190	°C

Extrusion	Nominal Value	Unit
Melt Temperature	160 to 190	°C

Note Message
1 .	500 mm/min
2 .	500 mm/min

Resin Grade	Manufacturer	Category	Trademark
TAROLOX 10 G5 X0	Taro Plast S.p.A.	PBT	TAROLOX
NaturePlast PHI 001	NaturePlast	PHA	NaturePlast
INLUBE PCGF30TF15	Infinity LTL Engineered Compounds	PC	INLUBE
Iupilon® GSH2050DF	Mitsubishi Engineering-Plastics Corp	PC	Iupilon®
REV Materials 8004-002	REV Materials	PP, Unspecified	REV Materials