Order Products : sales@su-jiao.com

NuSil CF3-3521

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gK4cy5_NuSil-CF3-3521.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications. Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chemical and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Fluorosilicones Comments: Liquid Injection Molding, Fuel resistant

Message

As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.

Benefits of Silicone for Electronics:

Wide Operating Temperature Range of -115 °C to 250 °C

Low moisture absorption, < 0.4% Typical

Corrosion Resistance

High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm

Fillers can be added to provide thermal and electrical conductive properties

Low Modulus (Typically less than 5.5 MPa/800 psi)

Stable chemical and mechanical properties when exposed to high temperatures

Low Shrinkage

Available as gels, elastomers, film adhesives sheeting, and greases

General Purpose: Fluorosilicones

Comments: Liquid Injection Molding, Fuel resistant

General Information
Features	Fuel Resistant Good Corrosion Resistance Good Thermal Stability Low Moisture Absorption Low Shrinkage
Uses	Electrical/Electronic Applications
Processing Method	Liquid Injection Molding (LIM)

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Extrusion Rate
Part A	75.0	g/min
Part B	125	g/min
Operating Temperature	-65 to 240	°C

Uncured Properties	Nominal Value	Unit
Color	Translucent
Density	1.26	g/cm³
Curing Time (150°C)	0.50	hr
Pot Life	600	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	30
Tensile Strength	4.83	MPa
Tensile Elongation at Break	380	%

Resin Grade	Manufacturer	Category	Trademark
RTP 381	RTP Company	PC	RTP
Sinpolene TPP1040	Teknor Apex Asia Pacific PTE. LTD.	PP Homopolymer	Sinpolene
Surlyn® 2601B	DuPont Packaging & Industrial Polymers	Ionomer	Surlyn®
NEXUS ABS ABS3545	Nexus Resin Group, LLC.	ABS	NEXUS ABS
Geon™ Vinyl Flexible 90031	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible