Order Products : sales@su-jiao.com

Nylene® NX4301

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gHP3Xt_Nylene-NX4301.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

High viscosity, UV stabilized extrusion grade nylon resistant to degradation by ultraviolet light

The elevated quality of UV resistance is attributed to highly uniform dispersion of 2% carbon black

With an ASTM viscosity of 200, NX4301 has very good melt flow and melt strength characteristics which are important for profile extrusion

Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die. (Available in black only)

General Information
Additive	Carbon Black (2%) Nucleating Agent
Features	Good Abrasion Resistance Good Toughness Grease Resistant High Melt Stability High Viscosity Low Odor Transfer Nucleated
Uses	Cast Film Film
Processing Method	Blown Film Cast Film Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.17	g/cm³	ASTM D792

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	70.3	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	140	%	ASTM D638
Flexural Strength (23°C)	117	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	53	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	62.2	°C	ASTM D648

Extrusion	Nominal Value	Unit
Melt Temperature	288 to 302	°C

Resin Grade	Manufacturer	Category	Trademark
RTP 200 F	RTP Company	Nylon 12	RTP
NuSil R-2380	NuSil Technology	Silicone	NuSil
Algoflon® D 2510 F	Solvay Specialty Polymers	PTFE	Algoflon®
FRAGOM G/991 XA	Crosspolimeri S.p.A.	Polyolefin, Unspecified	FRAGOM
ENFLEX S4035A	ENPLAST Americas, a Ravago Group Company	TPE	ENFLEX