Order Products : sales@su-jiao.com
Badaflex® TPE-S 65A 1541
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gG4NVx_Badaflex-TPE-S-65A-1541.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Elastomer based on SEBS for extrusion Overmoulding capability: Polypropylene (PP) |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 65 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 7.50 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 600 | % | DIN 53504 |
| Compression Set | DIN 53515 | ||
| 23°C, 72 hr | 23 | % | DIN 53515 |
| 70°C, 24 hr | 47 | % | DIN 53515 |
| 100°C, 24 hr | 75 | % | DIN 53515 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 19.0 | kN/m | DIN 53515 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 - 220 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MALAT 9383GFR300 | AD majoris | PBT | MALAT |
| Purell PE 3020 H | LyondellBasell Industries | LDPE | Purell |
| Borstar® FB3450 | Borealis AG | HDPE | Borstar® |
| ENPRENE 685 | En Chuan Chemical Industries Co,. Ltd. | SBS | ENPRENE |
| SABIC® PPcompound 9125 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
