Order Products : sales@su-jiao.com
Formolene® 6610A
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gEndkG_Formolene-6610A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 6610A is a high impact copolymer of polypropylene designed for such injection applications as automotive compounding, lawn & garden products and appliances. It is characterized by an excellent physical property balance of stiffness and impact at room temperature and sub-ambient conditions as well as finished product dimensional stability. It contains a unique combination of stabilizers, which provide excellent processing and usage performance. Formolene® 6610A meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 111 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 22.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 6.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, Injection Molded | 80 | J/m | |
| -18°C, Injection Molded | 91 | J/m | |
| 23°C, Injection Molded | 590 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, Injection Molded | 95.0 | °C | |
| 1.8 MPa, Unannealed, Injection Molded | 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2382 A TFE 15 | RTP Company | PUR, Unspecified | RTP |
| Siloxane Masterbatch MB50-313 | Multibase, A Dow Corning Company | Siloxane, UHMW | Siloxane Masterbatch |
| TAIRIPRO K3004 | Formosa Plastics Corporation | PP Impact Copolymer | TAIRIPRO |
| Makrolon® Sheet AR | Covestro - Polycarbonates | PC | Makrolon® Sheet |
| Sylvin 4280-90 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
