Order Products : sales@su-jiao.com
Starflam SF0067
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Eurostar Engineering Plastics |
| Trademark: | Starflam |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gELbXZ_StarflamSF0067.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Starflam SF0067 is a Halogen Free and Red Phosphorous Free Flame Retardant, Glass Fiber Reinforced, Polyamide 12 Injection Molding Resin |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| shrinkage- Flow (24 hr) | 0.20 - 0.40 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 101 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.3 | % | ISO 527-2 |
| Flexural Modulus | 7800 | MPa | ISO 178 |
| Flexural Stress | 140 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 10 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength (23°C) | 40 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(1.8 MPa, Unannealed, 64.0 mm Span) | 155 | °C | ISO 75-2/Af |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.6 mm, E2P Measurement) | V-0 | UL 94 | |
| Glow Wire Flammability Index (1.6 mm) | 960 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 210 - 230 | °C | |
| Middle Temperature | 220 - 250 | °C | |
| Front Temperature | 220 - 250 | °C | |
| Processing (Melt) Temp | 220 - 260 | °C | |
| Mold Temperature | 60 - 90 | °C |
| Note Message | |
|---|---|
| 1 . | 80x10x4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 211 | RTP Company | Nylon 66 | RTP |
| Bergamid™ A700 G30 H NC121 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| KetaSpire® KT-820 GF13 | Solvay Specialty Polymers | PEEK | KetaSpire® |
| Hostacom CB189FC/1 | LyondellBasell Industries | TPO (POE) | Hostacom |
| Petrothene® Select GS906061 | LyondellBasell Industries | LLDPE | Petrothene® Select |
